Netopia 2200 Bedienungsanleitung PDF herunterladen (Seite 265)

265

CONFIG Commands

set ppp module [vccn] mru

integer

Speciﬁes the Maximum Receive Unit (MRU) for the PPP interface. The

integer

argument

can be any number between 128 and 1492 for PPPoE; 1500 otherwise.

set ppp module [vccn] magic-number { on | off }

Enables or disables LCP magic number negotiation.

set ppp module [vccn] protocol-compression { on | off }

Speciﬁes whether you want the Netopia Gateway to compress the PPP Protocol ﬁeld when

it transmits datagrams over the PPP link.

set ppp module [vccn] lcp-echo-requests { on | off }

Speciﬁes whether you want your Netopia Gateway to send LCP echo requests. You should

turn off LCP echoing if you do not want the Netopia Gateway to drop a PPP link to a nonre-

sponsive peer.

set ppp module [vccn] echo-period

integer

Speciﬁes the number of seconds the Netopia Gateway should wait before sending another

echo from an LCP echo request. The integer argument can be any number from between 5

and 300 (seconds).

set ppp module [vccn] lost-echoes-max

integer

Speciﬁes the maximum number of lost echoes the Netopia Gateway should tolerate before

bringing down the PPP connection. The integer argument can be any number from between

1 and 20.

set ppp module [vccn] failures-max

integer

Speciﬁes the maximum number of Conﬁgure-NAK messages the PPP module can send

without having sent a Conﬁgure-ACK message. The integer argument can be any number

between 1 and 20.

1 2 ... 260 261 262 263 264 265 266 267 268 269 270 ... 350 351

Keine Kommentare

Netopia 2200 Bedienungsanleitung Seite 265