Netopia 2200 Bedienungsanleitung PDF herunterladen (Seite 250)

100

101

250

IP Settings

You can use the command line interface to specify whether TCP/IP is enabled, identify a

default Gateway, and to enter TCP/IP settings for the Netopia Gateway LAN and WAN ports.

☛ NOTE:

For the DSL platform you must identify the virtual PPP interface [vccn], a num-

ber from 1 to 8.

Common Settings

set ip option { on | off }

Enables or disables TCP/IP services in the Netopia Gateway. You must enable TCP/IP ser-

vices before you can enter other TCP/IP settings for the Netopia Gateway. If you turn off

TCP/IP services and save the new conﬁguration, the Netopia Gateway clears its TCP/IP

settings.

ARP Timeout Settings

set ip arp-timeout [ 60 ... 6000 ]

Sets the timeout value for ARP timeout. Default = 600 secs (10 mins); range = 60 secs -

6000 secs (1–100 mins).

DSL Settings

set ip dsl vccn address

ip_address

Assigns an IP address to the virtual circuit. Enter 0.0.0.0 if you want the virtual circuit to

obtain its IP address from a remote DHCP server.

set ip dsl vccn broadcast

broadcast_address

Speciﬁes the broadcast address for the TCP/IP network connected to the virtual circuit. IP

hosts use the broadcast address to send messages to every host on your network simulta-

neously.

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 350 351

Kommentare zu diesen Handbüchern

Keine Kommentare

Netopia 2200 Bedienungsanleitung Seite 250

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Netopia 2200